HONKON OPT S8C

Name: HONKON OPT S8C
Brand: HONKON
Availability: InStock
Rating: 5 (1 reviews)

Model	S8C
Handle	4pcs (F+EH, F+E+, F+E, I+E)
Spot size	840mm, 1560mm, 10*10mm
Energy density	10-50J/cm²
Pulse interval time	2-4s(step 1s)
Number of pulse	1-5T(step 1)
Width of 1st pulse	0.1-10.0ms
Insurance standard	Mask 10A
Output power	2000W
SHR frequency	1-10Hz
RF frequency	2.64Mhz
RF Power	5-50W (step 5w)
Cooling system	Water + air + semiconductor cooling
Power supply	AC110/220V±10%，50HZ-60HZ

GET A QUOTE

Description

Principle:
The essence of OPT technology is to maintain a high stable level of power flow throughout the pulse. In IPL systems without OPT, the pulse power constantly drops during its delivery, therefore, to ensure effective fluence, it is necessary to increase the power at the beginning of the pulse. Such systems produce a "triangular" pulse at the beginning of which the power is high, and at the end it drops to values at which the effect becomes ineffective. Such IPL systems can be effective at a sufficiently high peak power, but treatment procedures for pigment and vascular dyschromia on systems without OPT technology are fraught with pronounced side effects and discomfort. The thoughtful design of the xenon lamp and its power control, which form the basis of OPT technology in the OPT device, allow you to deliver a pulse of constant power. Thanks to this, the necessary effective fluence is delivered to the tissues without the need to "jack up" the power at the start of the pulse. Such an effect is generally much more gentle, safe and comfortable.

Application:
1. Pigmentattion removal: freckles, lentigines, age spots
2. Skin photo rejuvenation: pore tightening, fine lines and wrinkles, skin texture improvement
3. Hair removal
4. Acne removal
5. Vascular lesions removal

Handle:

8mm*40mm 15mm*60mm 10mm*10mm 8mm*40mm(vacuum)

5 filters：
1. Hair removal (610-1200nm)
2. Photo rejuvenation (530-1200nm)
3. Acne removal (430-1200nm)
4. Vascula removal (585-1200nm)
5. Freckle removal (560-1200nm)

Advantage:
1. Unique vacuum technology gives more effective clinical result. When skin is sucked into the connector, the density of melanin and hemoglobin decreases, which significantly reduces the competitive absorption of hemoglobin. Thus, more energy is directed directly to melanin, so the treatment result is doubled. At the same time, the vacuum temporarily shrinks the end of the nevus and reduces its sensitivity, thus painless treatment is carried out during the procedure.
2. Innovative OPT technology ensures stable energy output for each pulse, providing a safe and painless experience for the client.
3. Ergonomic interface for easy operator use.
4. Large spot size 15mm*60mm increases the speed of the procedure.
5. The smallest spot size allows for treatment in localized areas.
6. 4 handles, flexible combination, which provides the most effective treatment.

Vacuum Technology：
This technology consists of the following: a skin sector with hair follicles located on it is drawn into the cavity of the handle under the action of a vacuum. The following processes occur:
Firstly, due to stretching, the epidermis becomes thinner and less colored with melanin, which can screen radiation;
Secondly, local vasoconstriction occurs, and hemoglobin in the microvessels also begins to shield the radiation to a lesser extent;
Thirdly, the radiation reaches the follicles not only from above, as with a conventional handle, but also from different sides, so more photons reach each follicle than with the classic method. Thanks to all this, even at maximum energy values and when treating delicate areas, patients feel only heat during the procedures.

Before and after:

Technical specifications:

Model	S8C
Handle	4pcs (F+EH, F+E+, F+E, I+E)
Spot size	840mm, 1560mm, 10*10mm
Energy density	10-50J/cm²
Pulse interval time	2-4s(step 1s)
Number of pulses	1-5T(step 1)
Width of 1st pulse	0.1-10.0ms
Insurance standard	Mask 10A
Output power	2000W
SHR frequency	1-10Hz
RF frequency	2.64Mhz
RF Power	5-50W (step 5w)
Cooling system	Water + air + semiconductor cooling
Power supply	AC110/220V±10%，50HZ-60HZ